How Can We Help?

Adding a Duo Security Token to NetID

You are here:
< All Topics

Overview

Contact SalukiTech!

The Office of Information Technology (OIT) recommends using your smartphone or tablet device, with the Duo Security App installed, for Multi-Factor Authentication (MFA) access to SIU systems and software.

If you do not have a device or do not want to use it for MFA, you can purchase a D-100 Security Token from OIT. Only tokens purchased from SIU will work with SIU systems and Applications.

As of August 1, 2020, a D100 Duo Security Tokens costs:

$25/token for devices purchased by a student or employee. To purchase a token please contact SalukiTech.

Please follow these instructions once you have received your D-100 security token from SIU. This process will connect your token to your SIU Account via NetID.siu.edu.

Duo Key Fob with code displayed

Token setup after purchase

Logging into NetID and Accessing Duo Security.

  1. Open a web browser, such as Chrome, Firefox, or Microsoft Edge.
  2. Navigate to https://netid.siu.edu
  3. Log into you account using
    1. Your SIU E-Mail address
    2. Your SIU Password
  4. Click on the My Profile tab.
  5. Click on the Duo Security tab.

Detailed instructions for accessing NetID and the Duo Security tab can be found here.

Setting up your new security token

  1. Click on the Add new device button. It is located below the “Duo Security Token” box.
Add new device in duo security tab in netid.siu.edu
  1. Then select the Hardware Token radio button.
  2. Click Next
This image has an empty alt attribute; its file name is image.png
  1. Select the Duo D100 Token radio button.

    There are several types of devices that could work. The University selected the D-100 model due to the screen on the device. The screen enables users to use the MFA key, even when the device does not have a USB port – such as with a tablet or mobile device.
  2. Click Next
This image has an empty alt attribute; its file name is image-1.png
  1. Enter the serial number of the key fob. It can be found on the back of the device. In this example, the serial number starts with “45.”

    Do not include the dashes
Duo key fob - back of device with the device number for registration

** IMPORTANT ** Immediately after the digits listed on your D-100, add the following – GO6OATH

The letters referenced above are: (Golf, Oscar, 6, Oscar, Alpha, Tango, Hotel)

So, if your listed serial number was: 45-5687654-3
Then the value you enter in the Serial Number Box is:

4556876543GO6OATH

This image has an empty alt attribute; its file name is image-2.png
  1. Click Associate
  2. Click Done when the key has been added
This image has an empty alt attribute; its file name is image-3.png

Using the D-100 Token

When you need an MFA key, press the green button on your D-100 Token.

Pointer indicating the location of the green button on the bottom (or left) side of the device.

The number displayed on-screen is the one that you enter for your “code” or “second password”

Duo Key Fob with code displayed

Next Mapping a Network Drive
Was this article helpful?
0 out of 5 stars
5 Stars 0%
4 Stars 0%
3 Stars 0%
2 Stars 0%
1 Stars 0%
How can we improve this article?
Table of Contents

Leave a Reply